We offer a full range of polyester powder coatings suitable for
outdoor applications such as architectural metalwork, signage,
street furniture and other applications that require light and
Typical applications include:
Gates & Railings
Garden Tables & Chairs
Metallic's: Most coatings are available in a variety of metallic
finishes. A range of metallic epoxy-polyester powder coating
finishes although we can cater for most requirements.
Hammer Finishes: A full range of commercial hammer finishes can be
offered. Hammer finishes offer an attractive coating which are also
ideal for hiding blemishes on the original surface.
Textures: Leatherette and and fine textures are most commercially
available textures as required.
Gloss Levels: Most colours are available in a range of gloss
levels. We typically cater for matt, satin and full gloss finishes.
Lacquer: Clear lacquers are also available as a protective over
coat where required.
Specific Applications: A range of application specific premium
polyester powder coatings, some of which are detailed below:
Antibacterial Coatings: Specialist outdoor antibacterial polyester
powder coatings. This antibacterial polyester powder coating can
reduce bacterial population by 90% as tested on bacteria such as
Listeria, E-Coli, Salmonella and Legionella whilst maintaining all
of the characteristics of a regular polyester powder coating.
Furniture Coatings: Specialist exterior metal furniture powder
coatings from a range of suppliers including the Interpon F1500
system which offers excellent scratch and mar resistance combined
with weather & light resistance on a variety of substrates.
Anti-Graffiti Coatings: Specialist outdoor anti-grafitti powder
coatings and finds applications in a range of areas where standard
coatings fail to meet anti-stain criteria. The tested film
properties demonstrate no staining magic markers 24 hours from
|Testing items||Standards and methods||Inspecting index|
|Impact strength||GB/T1732-1993, AS3715 2.8||>50kg/cm|
|Bending resistance||GB/T1185-88, AS1580 402.1, ISO9227||Pass 2-5 millimeters|
|Adhesion CHECKED TEST||GB/T9286-88,2mm Cross cut, ISO2409||Pass100/100, passes 0 levels|
|Cupdrawing:Erichsen, ISO1520||Erichsen, ISO1520||Pass 3-7 millimeters|
|Pencil hardness||GB/T6739-86, Mitsubishi||Pass H-2H|
|Salt spray test||GB/T1771-91,500 hours||The cross section of corrosion less than 2MM|
|GB/T17740-79(89),1000 hours||Without air bubbles, loses the light slightly|
|Acid resistance||10% CH3COOH, 240 hours||Without air bubbles, the surface without damage|
|Alkali resistance||10% NaOH, 240 hours||Without air bubbles, the surface without damage|
|Heat resistance||200degree,1 hour||The color change is lower than E=1.5|
|Solvent resistance||MEK24 hours soaked in solvent-free||Without air bubbles, the surface without damage|
|Uvioresistant||QUV-313,500 hours||Gloss higher than 80% lower than the|
Munsell color change level
|Water tolerance||2 hours||No bubble, not falling, losing light|